HU
THE TWO-POLE FORMAT VOLTAGE TESTER
A measuring tool made of impact-resistant and unbreakable plastic that belongs in every electrician's tool bag.
With voltage measurement from 12-690 V, phase, continuity and rotating field testing, it covers the most important daily measuring tasks. The solid voltage tester is standard for electrical tests in industry and trade.
Safety when working on electrical installations
For work on live parts, the five safety rules must be observed. The FORMAT voltage and continuity tester is irreplaceable for establishing that there is no voltage! Safe working is thus made possible.
Also reliably perform rotary field tests
The FORMAT voltage tester can also be used for two-pole rotary field tests. The display shows whether a clockwise or anticlockwise rotating field is present.
Phase test to differentiate between phase and neutral
The single-pole phase test allows a quick differentiation between phase and neutral conductor, for example when testing sockets.
The integrated beeper helps with continuity testing
The integrated beeper helps with continuity testing
The FORMAT voltage tester can also be used for the daily continuity test that occurs in the application. It checks whether an electrically conductive cable is continuously connected from start to end or whether current cannot flow because the cable is interrupted. If continuity is present, a beep sounds and an LED lights up.
Simple operation even in dark environment
In new buildings or after a power failure, lighting conditions are often not good. Under voltage Parts could be accidentally touched or bypassed because they are not detected. The voltage tester with continuity tester helps here with a useful detail: a bright LED is integrated in the operating test probe, which can be switched on and in whose light cone work is easily possible.
Tested and approved according to EN 61243-3:2010 and EN 61010-1:2010
Direct voltage: 12-690 V
Continuity test: optical/acoustic
Frequency: 40-400 Hz
Rotary field test: LED
Phase check: LED
Polarity check: LED
Measuring point lighting: yes
Measurement category: CAT IV 600 V, CAT III 1000 V
Battery capacity: 2 x Micro AAA/LR03 (included)
Find your local specialist distributor!
Kérdezze meg a helyi » FORMAT forgalmazót!